This knife was made along side 2 other customs with the same type of blade. A 130 Layer Cadding Made Out of 26C3 and 15N20 and a Core Out of Uddeholm 2140 aka Arne. 2140 has good thougness and abrasion resistance which make's it perfect for knife making. Hardness of the Core Steel About 62 HRC.
The Knife has Slight Convex Grind and Thin Behind the Edge. Belief Are Shaped on Beltgrinder and have a fine handfinish before etching.
Handle: Walnut and Bog Oak
Length of Blade: 231 mm
Hight at heel: 54 mm
-Thickness of spine-
AT HANDLE: 3.8 mm
In the middle of the blade: 2.2 mm
1 cm from tip: 0.9 mm
Weight: 167 grams
Maker is Markus Turesson, Blacksmith at Steel by Lundbergs
Do you have any questions of the knife? Do you want more pictures? Please dont hesitate to send us a email or dm via facebook or instagram
The Knife has Slight Convex Grind and Thin Behind the Edge. Belief Are Shaped on Beltgrinder and have a fine handfinish before etching.
Handle: Walnut and Bog Oak
Length of Blade: 231 mm
Hight at heel: 54 mm
-Thickness of spine-
AT HANDLE: 3.8 mm
In the middle of the blade: 2.2 mm
1 cm from tip: 0.9 mm
Weight: 167 grams
Maker is Markus Turesson, Blacksmith at Steel by Lundbergs
Do you have any questions of the knife? Do you want more pictures? Please dont hesitate to send us a email or dm via facebook or instagram